✨ New Arrivals Just Dropped!Explore
HomeStore

Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

Product image 1
1 / 5

Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

Specifications:

CPU

 

LGA1200 package:

1. 11th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors

 

2. 10th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors / Intel® Core™ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors

 

3. L3 cache varies with CPU

Chipset

1. Intel® H470 Express Chipset

Memory

1. 11th Generation Intel® Core™ i9/i7/i5 processors:

 

Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

 

2. 10th Generation Intel® Core™ i9/i7 processors:

 

Support for DDR4 2933/2666/2400/2133 MHz memory modules

 

3. 10th Generation Intel® Core™ i5/i3/Pentium®/Celeron® processors:

 

Support for DDR4 2666/2400/2133 MHz memory modules

 

4. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

 

5. Dual channel memory architecture

 

6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

 

7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 

8. Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

 

1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

 

* Support for HDMI 1.4 version and HDCP 2.3.

 

2. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

 

* The D-Sub port is only available with the 10th Generation processors.

 

(Graphics specifications may vary depending on CPU support.)

Audio

1. Realtek® Audio CODEC

 

2. High Definition Audio

 

3. 2/4/5.1/7.1-channel

 

* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

LAN

1. Realtek® GbE LAN chip (1 Gbps/100 Mbps/10 Mbps)

Expansion Slots

CPU:

 

1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x16

 

Chipset:

 

1. 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1

Storage Interface

Chipset:

 

1. 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support)

 

2. 4 x SATA 6Gb/s connectors

 

RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices

 

* Supported with an additional PCIe to M.2 NVMe SSD adapter card

 

RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices

USB

Chipset:

 

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

 

2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector

 

2. 1 x 8-pin ATX 12V power connector

 

3. 1 x CPU fan header

 

4. 1 x system fan header

 

5. 1 x RGB LED strip header

 

6. 1 x M.2 Socket 3 connector

 

7. 4 x SATA 6Gb/s connectors

 

8. 1 x front panel header

 

9. 1 x front panel audio header

 

10. 1 x USB 3.2 Gen 1 header

 

11. 1 x USB 2.0/1.1 header

 

12. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

 

13. 1 x serial port header

 

14. 1 x Clear CMOS jumper

Back Panel Connectors

1. 1 x PS/2 keyboard/mouse port

 

2. 1 x D-Sub port

 

3. 1 x HDMI port

 

4. 2 x USB 3.2 Gen 1 ports

 

5. 4 x USB 2.0/1.1 ports

 

6. 1 x RJ-45 port

 

7. 3 x audio jacks

I/O Controller

1. iTE® I/O Controller Chip

H/W Monitoring

1. Voltage detection

 

2. Temperature detection

 

3. Fan speed detection

 

4. Fan fail warning

 

5. Fan speed contro

 

* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS

1. 1 x 128 Mbit flash

 

2. Use of licensed AMI UEFI BIOS

 

3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

1. Support for APP Center

 

* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

 

@BIOS

 

Ambient LED

 

EasyTune

 

Smart Backup

 

System Information Viewer

 

2. Support for Q-Flash

 

3. Support for Xpress Install

Operating System

1. Support for Windows 11 64-bit

 

2. Support for Windows 10 64-bit

Form Factor

1. Micro ATX Form Factor; 22.6cm x 18.5cm

Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

Specifications:

CPU

 

LGA1200 package:

1. 11th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors

 

2. 10th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors / Intel® Core™ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors

 

3. L3 cache varies with CPU

Chipset

1. Intel® H470 Express Chipset

Memory

1. 11th Generation Intel® Core™ i9/i7/i5 processors:

 

Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

 

2. 10th Generation Intel® Core™ i9/i7 processors:

 

Support for DDR4 2933/2666/2400/2133 MHz memory modules

 

3. 10th Generation Intel® Core™ i5/i3/Pentium®/Celeron® processors:

 

Support for DDR4 2666/2400/2133 MHz memory modules

 

4. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

 

5. Dual channel memory architecture

 

6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

 

7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 

8. Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

 

1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

 

* Support for HDMI 1.4 version and HDCP 2.3.

 

2. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

 

* The D-Sub port is only available with the 10th Generation processors.

 

(Graphics specifications may vary depending on CPU support.)

Audio

1. Realtek® Audio CODEC

 

2. High Definition Audio

 

3. 2/4/5.1/7.1-channel

 

* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

LAN

1. Realtek® GbE LAN chip (1 Gbps/100 Mbps/10 Mbps)

Expansion Slots

CPU:

 

1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x16

 

Chipset:

 

1. 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1

Storage Interface

Chipset:

 

1. 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support)

 

2. 4 x SATA 6Gb/s connectors

 

RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices

 

* Supported with an additional PCIe to M.2 NVMe SSD adapter card

 

RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices

USB

Chipset:

 

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

 

2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector

 

2. 1 x 8-pin ATX 12V power connector

 

3. 1 x CPU fan header

 

4. 1 x system fan header

 

5. 1 x RGB LED strip header

 

6. 1 x M.2 Socket 3 connector

 

7. 4 x SATA 6Gb/s connectors

 

8. 1 x front panel header

 

9. 1 x front panel audio header

 

10. 1 x USB 3.2 Gen 1 header

 

11. 1 x USB 2.0/1.1 header

 

12. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

 

13. 1 x serial port header

 

14. 1 x Clear CMOS jumper

Back Panel Connectors

1. 1 x PS/2 keyboard/mouse port

 

2. 1 x D-Sub port

 

3. 1 x HDMI port

 

4. 2 x USB 3.2 Gen 1 ports

 

5. 4 x USB 2.0/1.1 ports

 

6. 1 x RJ-45 port

 

7. 3 x audio jacks

I/O Controller

1. iTE® I/O Controller Chip

H/W Monitoring

1. Voltage detection

 

2. Temperature detection

 

3. Fan speed detection

 

4. Fan fail warning

 

5. Fan speed contro

 

* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS

1. 1 x 128 Mbit flash

 

2. Use of licensed AMI UEFI BIOS

 

3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

1. Support for APP Center

 

* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

 

@BIOS

 

Ambient LED

 

EasyTune

 

Smart Backup

 

System Information Viewer

 

2. Support for Q-Flash

 

3. Support for Xpress Install

Operating System

1. Support for Windows 11 64-bit

 

2. Support for Windows 10 64-bit

Form Factor

1. Micro ATX Form Factor; 22.6cm x 18.5cm

$28.28

Original: $80.80

-65%
Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

$80.80

$28.28

Description

Gigabyte H510M H V2 (rev. 1.0) M-ATX Gaming Motherboard

Specifications:

CPU

 

LGA1200 package:

1. 11th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors

 

2. 10th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors / Intel® Core™ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors

 

3. L3 cache varies with CPU

Chipset

1. Intel® H470 Express Chipset

Memory

1. 11th Generation Intel® Core™ i9/i7/i5 processors:

 

Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

 

2. 10th Generation Intel® Core™ i9/i7 processors:

 

Support for DDR4 2933/2666/2400/2133 MHz memory modules

 

3. 10th Generation Intel® Core™ i5/i3/Pentium®/Celeron® processors:

 

Support for DDR4 2666/2400/2133 MHz memory modules

 

4. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

 

5. Dual channel memory architecture

 

6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

 

7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 

8. Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

 

1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

 

* Support for HDMI 1.4 version and HDCP 2.3.

 

2. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

 

* The D-Sub port is only available with the 10th Generation processors.

 

(Graphics specifications may vary depending on CPU support.)

Audio

1. Realtek® Audio CODEC

 

2. High Definition Audio

 

3. 2/4/5.1/7.1-channel

 

* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

LAN

1. Realtek® GbE LAN chip (1 Gbps/100 Mbps/10 Mbps)

Expansion Slots

CPU:

 

1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x16

 

Chipset:

 

1. 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1

Storage Interface

Chipset:

 

1. 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support)

 

2. 4 x SATA 6Gb/s connectors

 

RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices

 

* Supported with an additional PCIe to M.2 NVMe SSD adapter card

 

RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices

USB

Chipset:

 

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

 

2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector

 

2. 1 x 8-pin ATX 12V power connector

 

3. 1 x CPU fan header

 

4. 1 x system fan header

 

5. 1 x RGB LED strip header

 

6. 1 x M.2 Socket 3 connector

 

7. 4 x SATA 6Gb/s connectors

 

8. 1 x front panel header

 

9. 1 x front panel audio header

 

10. 1 x USB 3.2 Gen 1 header

 

11. 1 x USB 2.0/1.1 header

 

12. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

 

13. 1 x serial port header

 

14. 1 x Clear CMOS jumper

Back Panel Connectors

1. 1 x PS/2 keyboard/mouse port

 

2. 1 x D-Sub port

 

3. 1 x HDMI port

 

4. 2 x USB 3.2 Gen 1 ports

 

5. 4 x USB 2.0/1.1 ports

 

6. 1 x RJ-45 port

 

7. 3 x audio jacks

I/O Controller

1. iTE® I/O Controller Chip

H/W Monitoring

1. Voltage detection

 

2. Temperature detection

 

3. Fan speed detection

 

4. Fan fail warning

 

5. Fan speed contro

 

* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS

1. 1 x 128 Mbit flash

 

2. Use of licensed AMI UEFI BIOS

 

3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

1. Support for APP Center

 

* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

 

@BIOS

 

Ambient LED

 

EasyTune

 

Smart Backup

 

System Information Viewer

 

2. Support for Q-Flash

 

3. Support for Xpress Install

Operating System

1. Support for Windows 11 64-bit

 

2. Support for Windows 10 64-bit

Form Factor

1. Micro ATX Form Factor; 22.6cm x 18.5cm